Horse HM-30 Unidirectional Carbon Fiber Fabric

Horse HM-30 Unidirectional Carbon Fiber Fabric

Horse HM-30 Unidirectional Carbon Fiber Fabric

Pricing: Bulk Pricing Available

Contact to Buy
Description

Product Brief

The Horse HM-30 is a high-strength Grade I unidirectional carbon fabric at 300 g/m² and 0.167 mm nominal thickness. It provides about 50% more fiber per layer than HM-20, making it the “sweet spot” for medium-load upgrade of main beams, bridge decks and columns—fewer layers than HM-20, easier to handle than HM-43/60.

1. Product Specifications

Specification 

Value 

Model 

Horse HM-30

Areal weight 

300 g/m²

Nominal thickness 

0.167 mm

Roll length 

100 m

Width 

100–500 mm 

Fiber orientation 

0° Unidirectional 

Strength grade 

High strength Grade I 

Yarn 

Aviation-grade carbon yarn

Shelf life 

10 years

2. Product Features 

· Balanced areal weight: efficiency vs workability 

· Reduces overlay layers for same fiber amount 

· Suitable for flexural and shear members 

· Stable batch quality for project-scale use 

Note: Specific performance indicators are subject to GBTECH confirmation.

 

3. Applications

· Main-beam flexural strengthening 

· Bridge deck reinforcement 

· Column bend/shear upgrade 

· Medium load-capacity increase 

4. Customization Services & Options 

Custom width, roll length, and epoxy system available. Provide concrete grade and target load increase for solution recommendation.

5. Pricing & Purchase Information

· Price: by specification and order volume 

· MOQ: Confirmed with quotation 

· Shipping: Worldwide 

· Stock: Subject to confirmation 

6. FAQ 

Q: HM-20 or HM-30? 

A: Small upgrade and many curves → HM-20; main beam medium upgrade → HM-30.  

Q: Can HM-30 replace HM-20? 

A: By fiber mass 1 layer HM-30 ≈ 1.5 layer HM-20; final layer count follows structural calculation.  So if the original design calls for 3 layers of HM-20, 2 layers of HM-30 would theoretically provide near-equivalent fiber content. However, whether replacement is feasible in practice depends on:Whether corners/curved surfaces allow a thicker fabric to conform properly;Whether lap length and anchorage requirements are satisfied;Whether epoxy consumption and application process need adjustment;The final layer count must be re-verified by structural calculation.



GBTECH

Carbon Fiber Products Manufacturer | GBTECH Factory & R&D Supplier

 

GBTECH U.S. Sales & Support
Website: www.gbtechmaterials.com
Email: zane@gbtechgroup.cn
Phone: +1 (510) 902-9987
California Warehouse: 38758 Buckboard Common, Fremont, CA 94536, United States
China Manufacturing Headquarters: Building 1, Left Side, Tangye Road, Xinxu, Huiyang, Huizhou, China
Selected standard products are stocked in California. Contact us to confirm availability, shipping origin and lead time for your specifications.

Got a Question? Send Us a Message

Verification code
Send message to us Send message
mes_name
mes_firm
mes_email
mes_tel
Verification code