
When selecting round pultruded solid rods, compare diameter, length, load direction and mounting method alongside the material requirements.
Pultruded Carbon Fiber Round Rod can be considered for lightweight supports, models, and industrial components. Final selection depends on the specific conditions of the project.
This is a solid composite rod with a round cross-section.
Review the GB-CF-PR pultruded carbon fiber rod series for its published process and fiber orientation.
This is not a hollow tube. Solid rods and tubes should be compared according to structural load and weight requirements.
Model aircraft, UAV components, photography equipment supports, lightweight industrial supports, and sporting equipment.
Suitability for a specific load-bearing component requires engineering evaluation.
For purchasing, key information includes diameter and length, required cutting, tensile/compressive or bending conditions, end connections, straightness, tolerances, and order volume.
Diameter alone does not determine the required strength or stiffness.
For the published GB-CF-PR series, the GBTECH website lists diameters of 2–50 mm, with customized options up to 100 mm, lengths up to 3000 mm, 0° pultrusion, and different surface options.
These data apply to the specific published series. Availability, lead time, and suitability for each order must be confirmed.
Provide the available installation space and loading conditions so that a solid rod can be compared with a hollow tube.
For holes, end machining, or special mounting requirements, please provide a drawing. Machining capability needs to be confirmed.
Diameter × length, quantity, application, loads, tolerances, surface requirements, and drawings.
Compare the rods and flat strips range, the carbon fiber rectangular bar selection page or hollow carbon fiber tubing when reviewing the section required for your application.
Request a quotation for round pultruded solid rods with your drawing, quantity and delivery requirements.
GBTECH U.S. Sales & Support
Website: www.gbtechmaterials.com
Email: zane@gbtechgroup.cn
Phone: +1 (510) 902-9987
California Warehouse: 38758 Buckboard Common, Fremont, CA 94536, United States
China Manufacturing Headquarters: Building 1, Left Side, Tangye Road, Xinxu, Huiyang, Huizhou, China
Selected standard products are stocked in California. Contact us to confirm availability, shipping origin and lead time for your specifications.